Manufacturer : Panel Bender    Press Brakes             Sales Contact : JACK HE              Tel :  +86-135-1658-9668            Email to :


Gives a brief introduction to working principle of bending machine and maintenance and maintenance method

by:Ragos     2021-03-16
Hydraulic bending machine including stent, workbench and clamping plate, workbench on the scaffold, workbench consists of base and the clamp, the base through the hinge is connected with the clamping plate, the base is composed of shell, the coil and plate, coil placed inside the shell of the sag, the depression at the top of the cover plate. When used by a conductor to coil electricity, after electrify produces gravity to clamp, so as to realize the clamping plate between the pressure plate and the base. With the electromagnetic clamping, making plate can be made into a variety of workpiece requirements, but also to have a wall of workpiece processing. Bending machine can change the bending machine mold, so as to meet the needs of various artifacts. In front of the machine maintenance or brush machine, upper die should be aimed at lower die down after shutdown, until after work, if you need to boot, or other operations, should will choose in manual mode, and ensure safety. The maintenance content is as follows: 1, 1) hydraulic circuit Weekly check the tank oil level, such as hydraulic system also should check after repair, oil level is lower than the oil window should include hydraulic oil; 2) This machine is used for the hydraulic oil for ISO HM46 or MOBIL DTE25; 3) New work 2000 hours after the oil should be replaced, later every work of 4000 ~ 6000 hours after the oil should be replaced, the oil change every time, should be cleaning tank; 4) System oil temperature should be between 35 ℃ ~ 60 ℃, shall not exceed 70 ℃, such as too high will lead to damage of metamorphic oil and accessories. 2, 1) filter Every time an oil change, filter should be replaced or cleaned thoroughly; 2) Associated with the machine alarm or clean oil filter and other abnormal, should be replaced; 3) Tank on the air filter, clean every three months to check, best 1 year replacement. 3, 1) hydraulic components Monthly clean hydraulic components ( Base board, valve, motor, pump, tubing, etc. ) , prevent dirt from entering the system, cannot use cleaner; 2) Phone use after a month, check whether there is any deformation on the oil pipe bend, if there is any exception should be replaced, use two months later, should tighten the joint of all parts, for the work should be shut down, when the system pressure.
Foshan Ragos NC Equipment co.,LTD. is a company that offers a wide selection of . OEM and ODM services are also available to users. To know more, go to Ragos Press Brake Machine.
Foshan Ragos NC Equipment co.,LTD. ’s purpose is to create superior value for our customers, employees, communities and investors through the production, conversion, delivery and sale of energy and energy services.
Loyalty programs provide an opportunity to learn the preferences of customers and design communication strategies that will resonate with Solution.
We studied how market-leading companies are harnessing data to reshapeFoshan Ragos NC Equipment co.,LTD. , and explored how they can put data to work for us in ways that create value for our own businesses.
cnc hydraulic press brake Solution with sheet metal press machine are used extensively in metal shearing machine.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...