What are CNC bending tools and installation and debugging matters needing attention

CNC bending tools is made up of many parts, so be sure to check when installing equipment state, and in strict accordance with the steps, at the same time pay attention to safety when installation and debugging, installation and debugging process of CNC bending machine mold. 1, the adjustment of the machine, before install, the first thing to adjust the machine performance, the process must be patient and careful to check the machine is used with ash and iron particles, such as the necessary cleaning, in order to reduce the trouble later. 2, stroke adjustment, pay attention to check the thickness of the mold and check module is normal, the proportion of the up and down in a normal route for module to control the switch point, you must be aware of this. 3, stroke the adjustment of the module, which is in view of the limit point adjustment module, the module on to the top, the switch is set up, and set aside the slider position, at the same time when the next to slow module, to better protect the machine and mold. Is 4, the adjustment of the gap, the main measurement module and the module in the distance, the specific gap setting is set according to the folding plate. 5, the adjustment of the Angle, the Angle adjustment has a certain relationship with the product, generally folds 90 & deg; Mould, then must be greater than the Angle on both sides of the middle Angle, then its elastic can be done according to the adjusting screw, when bending, can be through the pressure gauge pressure adjustment, avoid blade mould crack.
Ragos saves time and increases productivity because it's one of the most complete sources of business and contact information.
Foshan Ragos NC Equipment co.,LTD. is one of leading sheet metal press machine Solution distributors. You can order , and accessories for your need. Meeting your business need is always our top priority. Any of your enquiry is warmly welcomed.
Foshan Ragos NC Equipment co.,LTD. believes that the shorter the path between consumer and product, the more likely businesses are to convert more sales.