Specify the proper use of operation press equipment

in the startup or coining operation, the operator to stand properly, hand and head should keep a certain distance with press brake machine, and always pay attention to the press brake machine movement, it is strictly prohibited to chat with other people. 1. operators must pass through learning, master press brake machine and surrounding feeder, leveling machine equipment such as structure, performance, familiar with the operation procedures and operation license shall be independent operation; 2. Proper use of equipment safety protection and control device, shall not be arbitrarily disassembled and changes; 3. Check the transmission of the lathe, connections, lubrication and protection insurance device is normal, in areas such as the filling mold screw must be strong, cannot be moved; 4. The machine should be 2 - short run before work 3 minutes, check the foot brake control devices such as flexibility, confirmed rear can normal use, shall not take a disease; 5. Mould when matter is firm, upper and lower die for, ensure correct position and turn to move by hand machine try to rush, Empty) And ensure that the work in the mould is in good condition; 6. Before driving to pay attention to lubrication, remove all floating on the surface of the bed put items; 7. in the startup or coining operation, the operator to stand properly, hand and head should keep a certain distance with press brake machine, and always pay attention to the press brake machine movement, it is forbidden to talk with others; 8. Coining small workpieces, specialized tools, may not be directly with the hand feeding or pick-up; 9. Coining usbam parts, should establish system of safety materials or take other security measures, so as not to dig injury; 10. Single shot, hands and feet are not allowed to be on hand and foot brake, must be blunt once moved ( Step) Once, beware of accident; 11. Two or more persons jointly operation, responsible for moving, Step) Brake, must pay attention to feed people action, it is forbidden to one side, one side move ( Step) Brake; 12. To stop at the end of the work in time, cut off power supply, wipes machine, finishing the environment; 13. According to the relevant equipment regular maintenance of equipment, remember when making the maintenance, must cut off power supply first.
The , essentially perfected by sheet metal equipment, is one of the first home appliance to be widely distributed.
Ragos Press Brake Machine has a whole range of different items to help you make an informed choice every time you make a purchase. Check it!
If something seems too good to be true, then it can be a , which provides metal shearing machine value over its cost.