Manufacturer : Panel Bender    Press Brakes             Sales Contact : JACK HE              Tel :  +86-135-1658-9668            Email to :


CNC punch press machining method and safety operation procedures

by:Ragos     2021-02-28
Turret punching processing method 1) Single shot: a single complete punching, including straight line, arc distribution, the circular distribution, grid hole punching. 2) Same direction of continuous cutting: using rectangular mold overlap processing, can carry on the processing of long hole, trimming, etc. 3) More continuous cutting direction: using small mold machining way of big hole. 4) Eat: use small circular die with small interval for continuous strike arc processing way. 5) Single forming: according to the mold shape a shallow deep drawing forming processing way. 6) Continuous forming, molding processing way bigger than a mold size, such as large size blinds, rolled steel, roll the steps such as processing way. 7) Array shape: on the tablet processing more than the same or different ways of workpiece machining. CNC punch press safety operating rules: 1. it is best to have some basic knowledge of CAD, and after training and learning, can grasp the equipment structure, performance, familiar with the operation procedures and operation license shall be independent operation. 2. Proper use of equipment safety protection and control device, can't any open. 3. Check the transmission of the lathe, connections, lubrication and protection insurance device is normal, in areas such as the filling mold screw must be strong, not to rob the mobile. 4. The machine should be 2 - short run before work 3 minutes, check the foot brake control devices such as flexibility, confirmed rear can normal use, shall not let the machine to run in spite of illness. 5. Mould when matter is firm, upper and lower die for, ensure correct position and turn to move by hand machine try to rush, Empty) To ensure the work in the mould is in good condition. 6. Before driving to pay attention to lubrication, remove all floating on the surface of the bed put items. 7. in moving or coining operation, the operator to stand properly, hand and head should keep a certain distance with press brake machine, and always pay attention to the punch movement, it is strictly prohibited in the machine works with others to chat or go away. 8. Coining is small workpieces, specialized tools, may not be directly with the hand feeding or pick-up. 9. Coining usbam parts, should establish system of safety supporting material or other security measures, so as not to dig. 10. Single shot, hands and feet are not allowed to be on hand and foot brake, must be blunt once moved ( Step) Once, fight the accident. 11. Two or more persons jointly operation, responsible for moving, Step) Brake, must pay attention to feed people action, it is forbidden to one side, one side move ( Step) Brake. 12. To stop at the end of the work in time, cut off power supply, washing machine, tidy environment.
Finding a reliable solution for the Solution cnc hydraulic press brake not only supports operation of the entire system but also enhance the beauty of your workplace.
Finding the best products has been made easier, at Foshan Ragos NC Equipment co.,LTD. . Here you can see completed ranges of produced with advanced equipment and strict quality control. Go to Ragos Press Brake Machine and send your enquiry if you have any question.
Foshan Ragos NC Equipment co.,LTD. has never compromised on the quality and the services provided to the customer.
Foshan Ragos NC Equipment co.,LTD. has been making a name for itself as a producer of some of the finest in the China, and it has been singing its praises for some time.
Custom message
Chat Online
Chat Online
Leave Your Message inputting...