CNC bending machine appear error is how to adjust

In the process of CNC bending machine for inspection, if there is no development of the phenomenon of damage, just check the parallelism of slide blocks and workbench, if can't satisfy the use requirement, it can be adjusted in accordance with the relevant standards, makes the parallelism can maintain in the permitted range. If bending mechanism Angle still exists a certain error, it may not be because of the mould, or parallelism problem, it is likely to be in the machine tool hydraulic system, the balancing mechanism about not ensure uniform pressure oil into the cylinder, it needs to adjust. This time, adjust the workings of a bending machine to the state of the dynamic adjustment, and then remove the mould of machine tools, or some other accessories, so that we can make the slider stays on the mechanical stop, and then the pressure gauge to the need of pressure value. Specifically, it is bending machine 3 - dial indicator in the header compression 4 mm, stepping foot let system booster, booster in bending machine system or the system charge, check the dial indicator clock offset, can stop the operation if the specified value.
There are a lot of businesses today that are very much in demand and one of them is a Solution.
See reviews of the latest trend in Solution industry at Ragos Press Brake Machine, and see the best that work in just minutes! Visit us right away!
Advanced technology and manufacturing equipment has enhanced the core quality of Solution.